Updating Braindump2go Exam Dumps
Hi, this is the official Braindump2go Blog! We Share the Latest Certification News Here, such as Microsoft, Cisco, CompTIA, Amazon, Juniper, VMware, etc.
 

Braindump2go Free Exam Cisco 350-080 Practice Exam Questions (241-250)

Home  /   Braindump2go Free Exam Cisco 350-080 Practice Exam Questions (241-250)

CISCIO NEW UPDATED: New Updated 350-080 Exam Questions from Braindump2go 350-080 PDF Dumps and 350-080 VCE Dumps! Welcome to Download the Newest Braindump2go 350-080 VCE&PDF Dumps: http://www.braindump2go.com/350-080.html (394 Q&As)

Important News: Cisco 350-080 Exam Questions are been updated recently! Braindumo2go offers the latest up-to-date 350-080 Dumps for free instant download which helps you pass 350-080 Exam in a short time! Our 350-080 Exam Dumps has two version: 350-080 PDF Dumps,350-080 VCE Dumps! Choose one of them according to your own need! 100% New 350-080 Exam Questions from Cisco Official Exam Center! 100% Pass Cisco 350-080 Exam!

Vendor: Cisco
Exam Code: 350-080
Exam Name: CCIE Data Center Written Exam

350-080 Dumps,350-080 Exam Dumps,350-080 Brainfump,350-080 Questions,350-080 VCE,350-080 PDF,350-080 Actual Test,350-080 Study Guide,350-080 Book,350-080 CCIE Data Center Written Exam,350-080 Test

QUESTION 241
Which two server models support single-wire management for Cisco UCS C-Series integration with Cisco UCS Manager? (Choose two.)

A.    Cisco UCS C200 M2 server
B.    Cisco UCS C250 M2 server
C.    Cisco UCS C260 M2 server
D.    Cisco UCS C240 M3 server
E.    Cisco UCS C240 M2 server

Answer: CD

QUESTION 242
Refer to the exhibit. Assume that the Cisco UCS 6200 Series Fabric Interconnects are equipped with 16 port expansion modules. What is the impact of the last command in the exhibit?


A.    Fabric interconnect B will reboot.
B.    The expansion module on fabric interconnect B will reload.
C.    The command will generate an error.
D.    Both fabric A and B expansion modules will reload.
E.    The expansion module on fabric interconnect B will reload according to the maintenance policy that is set by Cisco UCS Manager.

Answer: C

QUESTION 243
You have configured a Cisco UCS C460 M2 Rack-Mount Server with two VIC 1225 adapters for single-wire management with Cisco UCS Manager. Which statement correctly describes the operation of these adapters?

A.    One VIC is designated to carry management, and the other VIC is designated to carry data traffic.
B.    Both VICs will be used for management and data traffic.
C.    One VIC will carry management, and both VICs will carry data traffic.
D.    The Cisco UCS C460 M2 does not support two VIC 1225 adapters simultaneously.

Answer: C

QUESTION 244
Refer to the exhibit. Which option describes the output that is shown in bold in the exhibit?


A.    This output represents a standby VIF.
B.    This output indicates that fabric failover has been enabled on vNIC 3.
C.    This output represents a reserved system VIF.
D.    This output represents an unpinned interface.

Answer: A

QUESTION 245
Which two FEX connection modes are correct? (Choose two.)

A.    hard-pinning mode
B.    soft-pinning mode
C.    port channel mode
D.    physical-pinning mode
E.    vlan pinning mode

Answer: AC

QUESTION 246
Which four port types are included in the VLAN port count? (Choose four.)

A.    border uplink Ethernet ports
B.    border uplink EtherChannel member ports
C.    FCoE ports in a SAN cloud
D.    static and dynamic vNICs created through service profiles
E.    VLANs
F.    VSANs
G.    Private VSANs
H.    Private VLANs

Answer: ABCD

QUESTION 247
What is the default MTU for Fibre Channel on Cisco UCS Manager?

A.    2112
B.    2240
C.    2000
D.    9216

Answer: B

QUESTION 248
Refer to the ex

hibit. How many additional chassis equipped with Cisco UCS 2204XP I/O Modules could be connected at maximum bandwidth without exceeding the existing port licenses?


A.    1
B.    2
C.    3
D.    4
E.    5

Answer: B

QUESTION 249
Which two items have an impact on the maximum number of virtual interfaces that can be created on a virtual interface card? (Choose two.)

A.    number of blades in the chassis
B.    number of acknowledged links between the Fabric Interconnect and the I/O module
C.    number of connected uplinks
D.    number of Fabric Interconnect port ASICs used by uplinks
E.    number of Fabric Interconnects
F.    number of VIC

Answer: BD

QUESTION 250
Which feature must be enabled on the upstream Fibre Channel switch if the fabric interconnect is configured in end-host mode?

A.    NPV
B.    NPIV
C.    Zoning
D.    Smart Zoning

Answer: B


Braindump2go New Released 350-080 Dump PDF Free Download, 394 Questions in all, Passing Your Exam 100% Easily!

FREE DOWNLOAD: NEW UPDATED 350-080 PDF Dumps & 350-080 VCE Dumps from Braindump2go: http://www.braindump2go.com/350-080.html (394 Q&A)