Updating Braindump2go Exam Dumps
Hi, this is the official Braindump2go Blog! We Share the Latest Certification News Here, such as Microsoft, Cisco, CompTIA, Amazon, Juniper, VMware, etc.
 

100% Pass Your Microsoft 70-413 Exam(95-104)

Home  /   100% Pass Your Microsoft 70-413 Exam(95-104)

QUESTION 95
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the DHCP Server server role installed. The network contains a Virtual Desktop Infrastructure (VDI). All virtual machines run Windows 8.
You identify the following requirements for allocating IPv4 addresses to client computers:
– All virtual desktops must have static IP addresses.
– All laptop computers must receive dynamic IP addresses.
– All virtual desktops must be prevented from obtaining dynamic address.
You need to recommend a DHCP solution that meets the requirements for allocating IPv4 addresses. The solution must use the least amount of administrative effort. What should you recommend? More than one answer choice may achieve the goal.
Select the BEST answer.

A.    Create two physical subnets. Configure 802.1x authentication for each subnet.
B.    Create two physical subnets. Connect the laptop computers to the subnet that contains Server1.
C.    Configure DHCP filtering.
D.    Configure DHCP policies.

Answer: C

QUESTION 96
Your network contains an Active Directory forest that has two domains named contoso.com and europe. contoso.com. The forest contains five servers. The servers are configured as shown in the following table.
 clip_image002
You plan to manage the DHCP settings and the DNS settings centrally by using IP Address Management (IPAM).
You need to ensure that you can use IPAM to manage the DHCP and DNS settings in both domains. The solution must use the minimum amount of administrative effort.
What should you do?

A.    Upgrade DCE1 and DCE2 to Windows Server 2012, and then install the IP Address Management
(IPAM) Server feature. Run the Invoke-IpamGpoProvisioning cmdlet for each domain.
B.    Upgrade DCE1 and DCE2 to Windows Server 2012, and then install the IP Address Management
(IPAM) Server feature. Run the Set-IpamConfiguration cmdlet for each domain.
C.    Upgrade DC1 and DC2 to Windows Server 2012, and then install the IP Address Management (IPAM)
Server feature. Run the Set-IpamConfiguration cmdlet for each domain.
D.    Upgrade DC1 and DC2 to Windows Server 2012, and then install the IP Address Management (IPAM)
Server feature. Run the Invoke-IpamGpoProvisioning cmdlet for each domain.

Answer: A

QUESTION 97
Your company is a hosting provider that provides cloud-based services to multiple customers.
Each customer has its own Active Directory forest located in your company’s datacenter.
You plan to provide VPN access to each customer. The VPN solution will use RADIUS for authentication services and accounting services.
You need to recommend a solution to forward authentication and accounting messages from the perimeter network to the Active Directory forest of each customer.
What should you recommend?
More than one answer choice may achieve the goal.
Select the BEST answer.

A.    A RADIUS server for each customer and one RADIUS proxy
B.    A RADIUS server for each customer and a RADIUS proxy for each customer
C.    One RADIUS proxy and one Active Directory Lightweight Directory Services (AD LDS) instance for
each customer
D.    One RADIUS proxy for each customer and Active Directory Federation Services (AD FS)

Answer: A

QUESTION 98
Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2008 R2.
You plan to replace the domain controllers with new servers that run Windows Server 2012. The new servers will be named DC3 and DC4.
You need to recommend a strategy to replace DC1 and DC2 with DC3 and DC4. The solution must minimize the amount of disruption to the users.
Which three actions should you recommend?
To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.
 clip_image002[4]
Answer:
 clip_image002[6]

QUESTION 99
Your network contains an Active Directory forest.
The forest contains two domains named contoso.com and fabrikam.com.
You plan to decommission the fabrikam.com domain.
You need to perform the following migration tasks:
– Copy user accounts from the fabrikam.com domain to the contoso.com domain.
– Move the client computers from fabrikam.com to contoso.com.
The solution must ensure that all of the user profiles are associated to the migrated user accounts.
Which tool should you use to perform each task?
To answer, drag the appropriate tool to the correct migration task in the answer area.
Each tool may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
 clip_image002[8]
Answer:
 clip_image002[10]

QUESTION 100
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2008 R2. Server1 is a file server.
You deploy a new member server named Server2 that runs Windows Server 2012.
You plan to migrate file shares from Server1 to Server2. File share and NTFS permissions are assigned only to domain local groups.
You need to identify which actions are required to perform the migration.
Which five actions should you identify? To answer, move the five appropriate actions from the list of actions to the answer area and arrange them in the correct order.
 clip_image002[12]
Answer:
 clip_image002[14]

QUESTION 101
Your company plans to deploy a remote access solution to meet the following requirements:
– Ensure that client computers that are connected to the Internet can be managed remotely without requiring that the user log on.
– Ensure that client computers that run Windows Vista or earlier can connect remotely.
– Ensure that non-domain-joined computers can connect remotely by using TCP port 443.
You need to identify which remote access solutions meet the requirements.
Which solutions should you identify?
To answer, drag the appropriate solution to the correct requirement in the answer area.
Each solution may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
 clip_image002[16]
Answer:
 clip_image002[18]

QUESTION 102
Your network contains an Active Directory domain named contoso.com. The domain contains three Active Directory sites. The Active Directory sites are configured as shown in the following table.
 clip_image002[22]
The sites connect to each other by using the site links shown in the following table.
 clip_image002[24]
You need to design the Active Directory site topology to meet the following requirements:
– Ensure that all replication traffic between Site2 and Site3 replicates through Site1 if a domain controller in Site1 is available.
– Ensure that the domain controllers between Site2 and Site3 can replicate if all of the domain controllers in Site1 are unavailable.
What should you do?

A.    Delete Link2.
B.    Disable site link bridging.
C.    Delete Link3.
D.    Create one site link bridge.

Answer: B

QUESTION 103
You have a server named Server1 that runs Windows Server 2012.
You have a 3-TB database that will be moved to Server1. Server1 has the following physical disks:
– Three 2-TB SATA disks that are attached to a single IDE controller
– One 1-TB SATA disk that is attached to a single IDE controller
You need to recommend a solution to ensure that the database can be moved to Server1. solution must ensure that the database is available if a single disk fails.
What should you include in the recommendation?

A.    Add each disk to a separate storage pool. Create a mirrored virtual disk.
B.    Add two disks to a storage pool. Add the other disk to another storage pool. Create a mirrored virtual disk.
C.    Add all of the disks to a single storage pool, and then create two simple virtual disks.
D.    Add all of the disks to a single storage pool, and then create a parity virtual disk.

Answer: D

QUESTION 104
Your company has a main office and a branch office.
The network contains an Active Directory domain named contoso.com. The domain contains three domain controllers. The domain controllers are configured as shown in the following table.
 clip_image001
The domain contains two global groups. The groups are configured as shown in the following table.
 clip_image001[4]
You need to ensure that the RODC is configured to meet the following requirements:
– Cache passwords for all of the members of Branch1Users.
– Prevent the caching of passwords for the members of Helpdesk.
What should you do?

A.    Create a Password Settings object (PSO) for the Helpdesk group.
B.    Install the BranchCache feature on RODC1.
C.    Modify the password replication policy of RODC1.
D.    Modify the delegation settings of RODC1.

Answer: C

Passing Microsoft 70-413 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-413 Dump: http://www.braindump2go.com/70-413.html