Small form factor PCs that utilize full-height PCI and PCI-Express cards need which of the following supplementary items to allow for proper installation?
A. FireWire cards
B. Riser cards
C. Storage cards
D. Network cards
Which of the following is a clear characteristic of an IPv6 Internet address?
A. 32 bit length
B. APIPA compatibility
C. 128 bit length
D. 64 bit length
The term "WAN" is commonly used when describing which of the following networks?
B. Local Wi-Fi network
D. Ad hoc Wi-Fi network
Which of the following is BEST used for fire safety to prevent toxic fumes during a fire?
A. Multi-mode cables
B. Single-mode cable
C. PVC cables
D. Plenum cables
Which of the following cards would utilize a 4G signal to provide Internet access?
A. Wi-Fi cards
B. Cellular cards
C. Sound cards
D. USB cards
A technician is installing new hard drives into a server and needs to set IDs to numbers ranging from 0-15. Which of the following types of drives is the technician installing?
Which of the following devices forwards any packet to all ports regardless of the packet address?
Which of the following appliances can function as a connection point between network devices as well as provide access to the Internet?
Which of the following laptop hardware would be the LEAST likely to be replaced?
B. Display screen
D. Hard drive
Drag and Drop Questions
Instructons: Use the tabs at the top to switch between the PCs. Objects should be placed on the appropriate slot/display areas and can only be used once. All slot/display areas should be filled.
Once the simulation is complete, select the done button to submit.
Answer: See Answer from Full Version
Which of the following ports is associated with HTTPS?
A customer needs 4 new systems for their engineering design department. Which of the following options would BEST satisfy the client’s requirements? (Select TWO).
A. USB 3.0
B. DVI output
C. Thin client
E. Fast Ethernet
A technician has been dispatched to install a maintenance kit in a laser printer. Which of the following components should the technician avoid touching when performing the installation?
A. Fuser housing
B. Transfer roller
C. Pickup roller
D. Toner cartridge
Which of the following is a type of Fiber connector?
A printer using multi-part forms has just had the ribbon replaced. After running a print job, the end user reports that the print is not visible on the third and fourth copies of the form. Which of the following will correct the issue?
A. Decrease the character per minute rate
B. Increase the platen gap
C. Increase the character per minute rate
D. Decrease the platen gap
Which of the following would be the MOST common use for a cable with a DE-15 connector?
C. RS-232 Serial
D. VGA Video
Get Your CompTIA 220-801 Certification By Using New Released Braindump2go 220-801 Dumps Full Version